Posts Tagged With: Trash to treasure

Save Money Up-Cycle Chairs with Found Fabric.

Tom and I have a thing for old chairs. I’m not sure, every couple finds themselves at furniture stores, yard sales and antique shops discussing how beautiful a chair is, but we do.

So often times I find old chairs that need a little love and update them. Not that we need another chair, but I just can’t walk away from them.  I love well-made chairs or rocking chairs. The first one in the photos below was set out for the trash. It was a small desk chair that was in perfect shape except for needing paint and an updated seat. The other is an accent chair that is made with a spring seat. The chair had been recovered once in the 1980s (my best guess) by the fabric style. A cat had done real damage to the fabric and it was stained and dirty. The arms and legs were in perfect shape and the springs were good.

Over in the last few years, I have learned some tricks that helped me save a ton of money doing recovering the chair myself. I really enjoy making these chairs look updated and ready to use again.

The largest amount of money was saved by finding the fabric used. Yea, you can find lots of nice large pieces of fabric at thrift stores or yard sales that were once used for curtains or bedspreads. The fabric I used on these two chairs was a twin bed duvet cover. I was able to use just the front panel of fabric and saved the back for another project. I purchased the Duvet at the local Goodwill for 4 dollars including tax. I think we ended up with 4 1/2 yards of fabric on each the front and back so a total of 9 yards of fabric for 4 dollars. Over a hundred dollar savings compared to regular new fabric prices.

SUPPLIES NEEDED TO RECOVER A LIVING ROOM CHAIR or SEAT COVER :

Staple Gun and a large pack of staples

Low loft quilt batting

Spray glue

Bottle of clear fabric glue

4 Yards of fabric or more

A flat tip screwdriver usually

50 or more furniture decorative tacks

Foam for a cushion of desk chair

 

Before pulling the chair apart I took the fabric and fitted it to the chair so I could see the pattern. I then measured the back and made sure I would have enough fabric to also cover the back.

 

img_20200120_080816255

test fitting old fabric to the chair.

 

I only removed the back panel of the chair and saved the gimp cord around the panel.  I wanted to make it look like I had recorded the chair. I then covered the front sides and back with quilt batting using a spray-on glue from Elmers.  I sprayed the glue onto the fabric waited 5 minutes until tacky and then unrolled the batting on to the seat and back trimming anything that got too thick and bunched. I then sprayed the back panel and did the same thing trimming inside the gimp cord. This very thin layer of batting smooths the finish of the material if there are lose spots. It also covers any dark material or patterns. So when I cover the chair the blue dots will not show through.

img_20200120_140058762

I also sprayed the glue on the back panel and added the batting. Once everything is dry it is time to stretch the material over the seat of the chair. Starting at the front lip of the seat frame I line the pattern up how I want it and staple the material to the wood frame Pulling the new material up and over the seat. Stopping to staple the material to the back frame after tucking it into the space between the seat and back. Then slowly I mark where the leg goes with an ink pen.  A small slit at the front leg location in the material. measuring how high the armrest comes up from the bottom of the frame to the place it comes out. Then  I make a slit in the material just as long as the base of the armrest. Then slowly I pull the fabric around the armrest and down into the fold around the base of the armrest until it sits nicely and hides any loose edges. Then I staple the fabric onto the frame doing the same on each side.  I go from one side to the other pulling the fabric so that it is stretched tight over the seat.  I fold the extra material back at the corners and tuck under and staple to the frame. Then  I do the same for the back of the chair but leaving some extra fabric in the large fold between seat and back for adjustment when someone sits. I staple the material on the sides and finally arrive at the top part of the wooden frame with no loose material.

Then I spray the back panel covering the gimp with glue also. I place the fabric centered over the panel with 2 inches of extra material around the edge. I smooth the fabric over the glue and let it rest on the kitchen table for about 10 minutes. Then flip the panel over I spray glue on the back of the gimp and some on the back of the old fabric. At each corner, I split the material about 1 inch and then fold the fabric together to make a smooth corner and add a touch of fabric glue ( the thicker clear glue is a squeeze tube) to hold in place. I let dry overnight.

At this point the all the glue is dry and the seat, sides, and seatback are covered with the new fabric. The back panel is ready to be put back in place with decorative tacks.

img_20200120_170731434

The back panel installed with decorative tacks below the gimp cord

I start with the top center tack while the chair is laying forward on its arms. I then smooth out the top and tack the corners pulling them tight just before I set the tack. I work my way down to the bottom and pull those corners down and tight and set those tacks next. I then just follow the gimp cord and try to place my tacks as close to the gimp cord as possible and finish the back panel.

To finish up the chair I go around the small cuts I made to the front and back of each armrest and glue anything that needs tucked in or smoothed out from my cutting.

img_20200120_170808629img_20200120_170746015img_20200120_140045783

The chair looks pretty good! I am super happy that I did not take apart the chair or remove any wooden pieces. It is not perfect and I do have a small tear around one of the arm bases but the glue keeps it looking pretty nice.

The other chair we picked up out of the trash is now a desk chair for my son.

img_20200322_160403047

 

All I did for this little chair was to remove the seat, sanded and spray painted the body a flat black. I added a new foam cushion to the seat that I attached with spray glue. I cut the foam just a little bit smaller than the wood seat.  I placed the new foam covered seat on the fabric and made sure the fabric reached the wooden back without pulling the fabric tight.  I made sure to have about an inch or two of extra fabric to staple to the wood back. Then I stretch the material lightly over the seat, flip it over and staple the fabric to the back.  I go back and forth with the staples to make sure the stretch is even. If you pull too hard the foam will dimple down and you will have to go back and pull out that staple and reset it. I had to reset two staples from pulling everything to tight but was happy with the results. Then I screw the seat back into the chair. You may have to trim fabric from the cushioned seat to get it out of the way of the screws and now you have two chairs that are looking great again.

My total cost for these to chairs to be recovered and painted:

free desk chair                                            0.00

armchair                                                    18.00

foam for cushion                                       12.00

low loft quilt batting                                   6.00

Fabric                                                             4.00

decorative furniture tacks                         5.00

spray paint                                                    4.00

small spray glue                                           4.00

small bottle fabric glue                               3.00

sanding block                                                4.00

Total price for chairs and recovering       $60.00

This could be less if you have any of these supplies on hand. I only bought the chair, fabric, tacks, low loft quilt batting and fabric glue. I had all the other supplies on hand from other projects.

In comparison, total savings are around 260 dollars.

This accent chair  was 225.00

 

French-traditional-upholstered-accent-hotel-armchairs-bedroom.jpg_640x640

and this desk chair is 95.00

school house chair

 

Categories: antique, antiques, chairs, DIY projects, furniture, save money, Thrift store finds, Trash to treasure, Uncategorized, up-cycling, upholstery | Tags: , , , , , , , , | 2 Comments

Volunteers Impact the Future of The Golden Rule Building.

GEDSC DIGITAL CAMERA

Often time’s volunteers don’t get to see the impact they have on a project. This is not the case with the volunteers who have helped begin the redevelopment of The Golden Rule building in Belington,WV this spring. Over 32 volunteers have spent over 220 hours donating their time and skills to bringing the 116 year old building back to life.

The Golden Rule volunteers have worked on everything from painting murals for the buildings windows while the frames are restored, to helping to remove up to 6,000 pounds of garbage, and pulling up over 6,000 square feet of old carpet and linoleum on the first floor. The work is hard and dirty but that does not seem to slow the volunteers down.

.logan and Patrick AmeriCorps members volunteer to toss out 4,000 pounds of trash

AmeriCorps Service members volunteer to help remove trash from the Golden Rule: Patrick Facemire and Logan McDonald AFHA 2018 service members.

AmeriCorps volunteers at the GR volunteer day

AmeriCorps Service Member and Preservation Alliance of West Virginia members volunteer to remove linoleum: Sarah Heuer a Elizabeth Satterfield.

Many of the volunteers are local church members who have an interest in community service but others like Mary Streets, of Belington, remembers her husband working at the Golden Rule in the 60’s and 70’s. She wants to see the building reopen and be an important part of the downtown area again. Mary spent her 83rd birthday with her daughter Stacy Streets and other volunteers at the building on July 21st of this year.

After a long hot afternoon working, I asked Mary about why she spent her birthday with us at the Golden Rule Building. She shared that the Golden Rule was full of good memories for her. She said, “It was nice to come back and visit a place where she often shopped and bought things for her kids.” She went on to say,  “My husband worked here for many years and we all felt like family here.” She was the most joyous member of our volunteer crew and explained that she was happy to be part of the rehabilitation that would make her home town a better place.

Mary and Stacy Streets at Golden Rule.Mary Streets and Daughter Stacy Streets help to clean debris at the Golden Rule.

Volunteers like Terri Kittle from the Belington Revitalization Committee have worked for 6 years trying to get the historic building redeveloped. Terri, head of the committee is passionate about the building and its future for Belington. Terri says, “The Golden Rule is vital to bringing downtown back to life. So working with Woodlands Development Group a non-profit developer in the region just made since.”

Woodlands Development Group purchased the building in April of 2018 and the work to clean out the building began a few weeks later. Dustin Smith project manager says “The Golden Rule project is a unique case when it comes to volunteerism; it is not often that we use volunteers but everyone is so interested in the project that we are happy to have the help.”

Volunteers clean out first floor of the GR

Volunteers from Mountain Valley Bank of Elkins work with Missionaries from the Church of Latter Day Saints

Volunteer days will continue throughout the next few months until the Open House that will include refreshments, tours and discussions about planes for the building. Many of the antique items found in the building will be on display and some will be for sale to the public. The Open House is planned for Saturday, Sept. 15th at the building at 122 Crim Ave. in Belington.

It is hoped that the volunteers that have worked on the project will come to the open house to share their experiences with the community and celebrate their hand in making the Golden Rule a better place for everyone in the community.

May 2018 mess first floor of the GR

Before photo of the main floor of the Golden Rule Building taken a week after purchase in May 2018

This is the after photo of the main floor after two volunteer days and hundreds of hours of sorting, tearing up flooring and removing trash.

Clean first floor of the Golden Rule before demo

The success of this project has been a grass-roots effort and will continue to be for the next few months. We had a wonderful turn out for the Golden Rule Open House with about 75 visitors stop to learn about the project or take a tour. It is hoped that new construction will begin at the start of the new year and we will have some work on the 10 upper story apartments done by summer. The Main floor will have a new elevator and a new fire safe stair well installed over the course of the next two years. Then a train depot, ticket counter with a coffee shop and retail space will be the last to be built-in the front of the first floor space.

 

 

 

Categories: AmeriCorps, Barbour County, Belington, WV, Building rehabilitation, Golden Rule, historic locations, Historic Preservation, Trash to treasure, Uncategorized, volunteering | Tags: , , , , , , , | Leave a comment

Blog at WordPress.com.

myoldtypewriter

The pleasures of a bunch of old typewriters

Mitch Teemley

The Power of Story

Barbour County Development Authority

Providing economic vitality for Barbour County, West Virginia

Life on the Massanutten

Musings from the Massanutten Mountain

The Helsingian Pathfinder

the inward path is the way ahead

Daydreaming Millennial

Come for the thoughts, stay with the journey.

Monkeying Around

Monks, monkeys and monkeying around. An adventurous life.

Shreya Vikram

Blurring the lines between poetry and prose

Dreaming Reality

If Existence is a dream, let us dream perfection....

alifeofvanity.wordpress.com/

For anyone who has ever thought of attempting the #vanlife, A Life of VANity is an unfiltered, realistic look at the unglamorous day-to-day happenings of life in a Chevy G20 Conversion van. Unlike other #vanlife blogs, A Life of VANity is here to show you that it isn’t all roadtrips and ocean-side views, and that there’s nothing wrong with living in a backyard or two.

Beyond the Campfire

Stories of exploration

Mark All My Words

Original Nature Photojournalism

Thrifty Campers

Nature Knows No Such Barriers

Missmackenzierose

Dream-Explore-Discover

%d bloggers like this: