Posts Tagged With: Anitques

Save Money Up-Cycle Chairs with Found Fabric.

Posted on April 21, 2020 by jolynnpowers

Tom and I have a thing for old chairs. I’m not sure, every couple finds themselves at furniture stores, yard sales and antique shops discussing how beautiful a chair is, but we do.

So often times I find old chairs that need a little love and update them. Not that we need another chair, but I just can’t walk away from them. I love well-made chairs or rocking chairs. The first one in the photos below was set out for the trash. It was a small desk chair that was in perfect shape except for needing paint and an updated seat. The other is an accent chair that is made with a spring seat. The chair had been recovered once in the 1980s (my best guess) by the fabric style. A cat had done real damage to the fabric and it was stained and dirty. The arms and legs were in perfect shape and the springs were good.

Over in the last few years, I have learned some tricks that helped me save a ton of money doing recovering the chair myself. I really enjoy making these chairs look updated and ready to use again.

Desk chair needing paint and a new seat

arm chair with cat damage

The largest amount of money was saved by finding the fabric used. Yea, you can find lots of nice large pieces of fabric at thrift stores or yard sales that were once used for curtains or bedspreads. The fabric I used on these two chairs was a twin bed duvet cover. I was able to use just the front panel of fabric and saved the back for another project. I purchased the Duvet at the local Goodwill for 4 dollars including tax. I think we ended up with 4 1/2 yards of fabric on each the front and back so a total of 9 yards of fabric for 4 dollars. Over a hundred dollar savings compared to regular new fabric prices.

SUPPLIES NEEDED TO RECOVER A LIVING ROOM CHAIR or SEAT COVER :

Staple Gun and a large pack of staples

Low loft quilt batting

Spray glue

Bottle of clear fabric glue

4 Yards of fabric or more

A flat tip screwdriver usually

50 or more furniture decorative tacks

Foam for a cushion of desk chair

Before pulling the chair apart I took the fabric and fitted it to the chair so I could see the pattern. I then measured the back and made sure I would have enough fabric to also cover the back.

test fitting old fabric to the chair.

I only removed the back panel of the chair and saved the gimp cord around the panel. I wanted to make it look like I had recorded the chair. I then covered the front sides and back with quilt batting using a spray-on glue from Elmers. I sprayed the glue onto the fabric waited 5 minutes until tacky and then unrolled the batting on to the seat and back trimming anything that got too thick and bunched. I then sprayed the back panel and did the same thing trimming inside the gimp cord. This very thin layer of batting smooths the finish of the material if there are lose spots. It also covers any dark material or patterns. So when I cover the chair the blue dots will not show through.

I also sprayed the glue on the back panel and added the batting. Once everything is dry it is time to stretch the material over the seat of the chair. Starting at the front lip of the seat frame I line the pattern up how I want it and staple the material to the wood frame Pulling the new material up and over the seat. Stopping to staple the material to the back frame after tucking it into the space between the seat and back. Then slowly I mark where the leg goes with an ink pen. A small slit at the front leg location in the material. measuring how high the armrest comes up from the bottom of the frame to the place it comes out. Then I make a slit in the material just as long as the base of the armrest. Then slowly I pull the fabric around the armrest and down into the fold around the base of the armrest until it sits nicely and hides any loose edges. Then I staple the fabric onto the frame doing the same on each side. I go from one side to the other pulling the fabric so that it is stretched tight over the seat. I fold the extra material back at the corners and tuck under and staple to the frame. Then I do the same for the back of the chair but leaving some extra fabric in the large fold between seat and back for adjustment when someone sits. I staple the material on the sides and finally arrive at the top part of the wooden frame with no loose material.

Then I spray the back panel covering the gimp with glue also. I place the fabric centered over the panel with 2 inches of extra material around the edge. I smooth the fabric over the glue and let it rest on the kitchen table for about 10 minutes. Then flip the panel over I spray glue on the back of the gimp and some on the back of the old fabric. At each corner, I split the material about 1 inch and then fold the fabric together to make a smooth corner and add a touch of fabric glue ( the thicker clear glue is a squeeze tube) to hold in place. I let dry overnight.

At this point the all the glue is dry and the seat, sides, and seatback are covered with the new fabric. The back panel is ready to be put back in place with decorative tacks.

The back panel installed with decorative tacks below the gimp cord

I start with the top center tack while the chair is laying forward on its arms. I then smooth out the top and tack the corners pulling them tight just before I set the tack. I work my way down to the bottom and pull those corners down and tight and set those tacks next. I then just follow the gimp cord and try to place my tacks as close to the gimp cord as possible and finish the back panel.

To finish up the chair I go around the small cuts I made to the front and back of each armrest and glue anything that needs tucked in or smoothed out from my cutting.

The chair looks pretty good! I am super happy that I did not take apart the chair or remove any wooden pieces. It is not perfect and I do have a small tear around one of the arm bases but the glue keeps it looking pretty nice.

The other chair we picked up out of the trash is now a desk chair for my son.

All I did for this little chair was to remove the seat, sanded and spray painted the body a flat black. I added a new foam cushion to the seat that I attached with spray glue. I cut the foam just a little bit smaller than the wood seat. I placed the new foam covered seat on the fabric and made sure the fabric reached the wooden back without pulling the fabric tight. I made sure to have about an inch or two of extra fabric to staple to the wood back. Then I stretch the material lightly over the seat, flip it over and staple the fabric to the back. I go back and forth with the staples to make sure the stretch is even. If you pull too hard the foam will dimple down and you will have to go back and pull out that staple and reset it. I had to reset two staples from pulling everything to tight but was happy with the results. Then I screw the seat back into the chair. You may have to trim fabric from the cushioned seat to get it out of the way of the screws and now you have two chairs that are looking great again.

My total cost for these to chairs to be recovered and painted:

free desk chair 0.00

armchair 18.00

foam for cushion 12.00

low loft quilt batting 6.00

Fabric 4.00

decorative furniture tacks 5.00

spray paint 4.00

small spray glue 4.00

small bottle fabric glue 3.00

sanding block 4.00

Total price for chairs and recovering $60.00

This could be less if you have any of these supplies on hand. I only bought the chair, fabric, tacks, low loft quilt batting and fabric glue. I had all the other supplies on hand from other projects.

In comparison, total savings are around 260 dollars.

This accent chair was 225.00

and this desk chair is 95.00

Categories: antique, antiques, chairs, DIY projects, furniture, save money, Thrift store finds, Trash to treasure, Uncategorized, up-cycling, upholstery | Tags: Anitques, chair, DIY projects, hands on, recycling, save money, Trash to treasure, upcycle, used furniture | 2 Comments

A Meaningful and Tired 2018. Year end photo gallery.

Posted on January 2, 2019 by jolynnpowers

Abandoned building in Philippi, West Virginia, former ball room.

Meaningful and tired are the words for my thoughts, feeling and photos for 2018. Over the year I was able to take beautiful photos, spend time with people I enjoy, do work that I find meaningful and I am still surprised at that. Being tired was my overall experience this year.I have never worked so hard at something I love so much in my life. Often I would work my 8 hours and walk 6 to 7 miles a day, up and down 3 flights of stairs. Then spend one day a week processing the items that I had carried down those same stairs. Some how,I kept my clothes washed, got my son to school and I walked another mile or two with my dog every day. I pushed hard on the weekends too, with updates to my house and trips with friends and family. I think, I finally collapsed into bed on the 21st of Dec. and just slept… I took a nap that afternoon that lasted 3 1/2 hours and then went to bed that night at 9:30 and slept 8 1/2 more.

So for fun I put together some of my more favorite photos from the year. 50 has been very eye-opening for me creatively. I have found “myself” as an artist and photographer and have finally found a subject matter that excites me!!As you will see, I have fallen head over heals in love with antiques and windows. I never realized how much I love the glow of light through a window and how that light fascinates me. Someone once said that we are always taking the same photograph over and over subconsciously until we discover what we love. Then we can focus on that subject and make a world out of it. Well the world opened up for me in 2018.

So I hope you enjoy my photos from the last year and I hope to do better next year with reaching my goals.

Clock at the Barbour County Court House

Court Room of the Grand Jury of Barbour County

Stained glass in ceiling of the Barbour County Court House

My first few days at the new AmeriCorps location at the Barbour County Development Authority. It was at this court house that I realized my future was working with the history of this community and it’s treasures.

main floor of the Golden Rule mess t 1st Day

Third floor wall and mess 1 st day

large collection of dirty doors 1st day at the Golden Rule

The following week was an over view of the project that I am still working on today. The Golden Rule building was purchased in April of 2018 and I was brought on board to help clean up the mess and help preserve and liquidate all the assets in the building. Needless to say I am still working on cleaning up the mess but some of the photos I have taken inside the building are priceless.

Adaland

Buffy table in dinning room of Adaland

bathroom window at Adaland

In June my office was invited to a luncheon at the Adaland Mansion ( circa 1841) where we explored and toured the grounds of the historic home in Barbour County. The food was traditional to the late 1800 to 1900’s and everyone dressed in time period costumes. It was a great break from the dirt and dust of the Golden Rule.

adding mechines and typewriter at the Golden Rule

Adding Machines, type writers and cash registers stored one at hardwood table

Basement full of bottles and plates

Broken Boy with Grape basket lamp by window.

Spoiled canned fish from the 70’s?

As the Summer wore on I found items that were strange, beautiful and unusual in the Golden Rule. My work was labor intensive, being the main person moving 7,000 pounds of garbage into bags and boxes day after day wore me out. But, the pay off was seeing, photographing and sometimes saving pieces of the past that would other wise be lost if the building had belonged to someone other than Woodlands Development Group.

Frog on moss covered stone Cranberry Wilderness WV

Bickels knob observitory Elkins WV

Allegheny trail head bridge Harmon WV

Finally in July we took a few days off to rest and spend time with the family. We fished, hiked and spent afternoons swimming in the river just enjoying a holiday weekend.

the Powers Men fishing off of Laural Fork river near Rich mountain

As summer came to a close it was announced that my home office would be moving and we were able to tour the new location for Woodlands Development Group in Elkins WV.

Door at the new Woodlands Development group office in Elkins WV

door to no where at the new Woodlands Development Group office

Wild Mountain Laurel Elkins WV

In Oct. we watched the West Virginia episode of “State Plate” with Taylor Hicks. I wondered how Tom and I ever survived cooking and eating on national TV. We both enjoyed seeing what they made out of day together.

Jolynn Powers and Taylor Hicks cooking in the kitchen.

Baked Apple Dumplings fresh out of the oven.

Then the Open House at the Golden Rule was an overwhelming success. We had over 100 visitors and gave tours to over 65 people in 4 hours. We raised over 300 dollars to help the preservation and rehabilitation of the building and I must have made 14 trips up and down those stairs again. I was really tired when it was over but it was worth all the work to put it together to see people enjoying my work!

Golden Rule Building 1902, Belington,West Virginia with window murals

Golden Rule sign

Vacation time came and I celebrated my 50th birthday in the best way. I went back in time and relived the joy and happiness of my youth at Hershey Park, PA. Riding roller-coasters and eating Hershey’s chocolate was so much fun and I got to see several old friends that I love dearly. Could not have planned something better if I tried.

Alex Christopher and tom at Hershey park

Alex Smits, Christopher Powers and Tom Powers having fun at my birthday trip to Hershey Park, PA.

Hershey Tower drop

Halloween is my favorite time of the year and this year I explored two ideas for my haunted house costume. The first was the idea of making myself into some kind of moth-man or fly-man and the other was the evil crow. In the end the mask and wings of a bird won out and I spent a great night at Christopher’s after-school program volunteering to scaring the heck out of young and old a like. I then went with the kids Trick or Treating as the scary crow and had a ball… the best few weeks of my year!

Halloween Costume #1 for 2018

halloween costume 2018

The Holidays were a blur, I remember that we had a nice couple of holiday dinners and I got to spend lots of time with my family and friends. I got to see Christopher sing at his choir concert and watched three movies at the theater in 9 days…. so much fun!

Christopher Powers in Santa hat age 10

Govenor’s Inn Main Street Buckhannon, WV

So it was a busy year and I learned tons about myself and what I want to do as an artist in the future. I think my photos are getting better and I realized that I do much better with natural light and I am not great at photographing people. I hope to work on that this year. So the goal is set to take at least 6 natural light portraits this year. We will see if I can reach that goal while painting another couple of murals.

Hope your holiday was a good one and I hope you have a productive 2019. Maybe it will slow down just a bit for me in 2019. I can only hope to do more traveling and spending more time with friends and family and continue to grow as an artist. BCDA MURAL 2018

Categories: About me, antiques, Art, Christmas, Golden Rule, New Years Eve, photo review, Photos, Travel, Uncategorized | Tags: about me, Anitques, Christmas, Golden Rule, New Year resolution, New Years Eve | 2 Comments

Something Old Becomes New Again: Victorian Style Lamp Repair.

Posted on June 23, 2017 by jolynnpowers

Shopping at Yard Sales and Flea Markets is something that Tom and I really enjoy doing in summer. So, when Tom found these two beautiful dismantled lamps tossed in a box at a yard sale, he had to have them. The price was reasonable at $8 dollars and it looked as if all the parts were in the box. I have never seen a set of lamps like them before and found them to be the perfect solution to life in West Virginia. Here the hills never know when you are going to have to live without power and for how long. Having the candles in the same place as the lamps makes life easier when you are looking for a secondary light source.

Antique lamps in need of some TLC

When we returned home with the box of parts I did a quick inventory of all the hanging crystals. I needed to see if they were all still in the box. I really did not want to go looking for 3 or 4 antique chandler crystals, if I could possible help it. I was in luck all of them were in the box all were in good shape and usable.

The pair of lamps were actually wired with a single plug-in cord so we knew that in all likely hood they were used on a dresser or on a antique vanity in the bedroom. The problem for us was that the cord was too short to go between our night stands to be used in the bedroom. We started a list and noted that we would need several feet of lamp wiring cord to separate the two lamps. A screw was missing from the base of one of the candle holders and very few of the crystals had their hanging wires left. We would need a little light weight wire, about 12 feet of cord, a screw and 2 new plugs to make the needed repairs. Now the cost of my $8 lamps would be about $30 dollars for the pair. I still think that price is reasonable for beautiful lamps like these.

Tom disassembled the lamps so he could rewire the sockets. The sockets were old like the lamps but not in need of replacement. Tom fed the old sockets and new 5 foot section of wire through the glass body of each lamp added a new plug to the end of the wires making the lamps individuals. He cleaned and polished all the glass of the lamps and reattached the candle holder and protective dish to the lamp that was missing them. Then the process of hanging the crystals was handed to me. I spent about two hours cutting uniform lengths of wire and hanging the crystals.

When we bought the lamps it appeared that the crystals had been hung on the lamps with wire nails. One end blunt and wide enough to not pass through the holes. The other end was a sharp point like a nail. I am guessing that this is not the usual way to hang crystals on light fixtures so I removed all the old rusty wire nails and started replacing them with short pieces of sliver wire. In the end I crimped the wires so the crystals would not have any way to fall off the lamp even if tipped over. They looked so nice once washed and put back in place where they belonged. Finally we could see what we had bought in the bottom of that old b

As you can see the end result is a lovely set of night stand lamps that fit the decor of the bedroom. I am often surprised at what we find on our trips to Flea Markets and Yard Sales, where something wonderful just needs someone to take the time to repair it. Toms nature is to see the potential in almost anything and I am so fortunate that he likes to bring wonderful things back to life.

Fixed Bedroom Light.jpg