Squirrles

We have been working like mad to finish up the floors and get a good start on the barn wood walls that are part of a remodel that we are doing with the T.V. Show titled “The Barnwood Builders.” Then all of our work just slowed to a stop on Monday. As Tom and I removed some of the larger boards from the lumber pile to see if we could find one that was wider then our fuse box door, we came across a nest built-in our barn wood. The babies are Gray Squirrels that normally would nest in a hard wood tree. It seems the mother felt that our huge pile of wood was a safe place to raise her young. She made a beautiful and warm nest out of the large amounts of green grass that is growing under the lumber piles. The little guys never even opened an eye while we banged around. Tom and I had no idea that they were sleeping under where we worked. By that afternoon we named the little ones and had a conversation about moving them in the house ( my vote was”NO”to squirrels in the house ) so here are Chipper and Splinter. The fearless squirrels that slowed the entire construction of my family room for a day.

Opening up the nest in the barn wood

Two baby gray squirrels in the nest sleep through all of our activity

Meet Chipper and Splinter the Barnwood Babies

Tom and I just did not have the heart to really move the little guys even though they are resting on the very board that we need to make a door out of. So we are working on another portion of the family room for now. I hope within the next two weeks they will be ready to head into the trees with their Mom, we see her regularly going in and out of the nest.

As of Friday I had finished grouting the tile floors and sealed them. They turned out really nice with a muted color pattern of gray, sand stone red, gold and rusty orange. The same basic colors in our barn wood. I spent about 30 hours of time putting in the grout and cleaning it back off. It was a long week of feeling like Cinderella scrubbing floors on my hands and knees but the results are wonderful. The one trick I did learn over my week of scrubbing is that it saves you large amounts of time to seal the slate before you install it or grout it. The extra couple of hours I spent washing the tile and sealing it meant that I could trust that the grout would not stick to the slate when I put them together. So I could actually sweep most of the extra grout off with a broom. Making the cleaning up of the floor go extremely fast with one good washing getting all the extra grout off with no residue to worry about.

After using a grout bag I am able to sweep up a lot of the loose grout before washing

Slate tile floors with grout and sealer

We also got almost half the wall boards up over the holiday weekend, even with the squirrel delay. Tom and I decided that we both really wanted a room with a barn feeling, so we chose to keep the boards running in the vertical pattern as they were hung on the old barn. It gives the room the feeling of a general store or cabin from the old west that we both love.

Barn wood about finished on wall with windows

This photo shows a late afternoon sun shining on the walls so the floor colors appear shadowed and darker than they really are. The wood on the other hand is really that bold and different in color. We chose not to plain the wood and only lightly sand the rough finish off the boards. We are trying to give the room a true rustic barn feel and I think we really are getting that feeling so far.

The work is going faster than I though, mainly because we are using an Air Nail Gun to attach the boards to the walls. The nails we are using are 2 1/2 inches long and we nail the board at the top of the walls frame and then at any stud that we can find and at the bottom frame of the wall. Some of the boards are very warped and need cut to straighten them for use and others are fine off the wood pile. So each piece is an individual in a larger puzzle. We have chosen to keep the imperfections and natural coloring because that is what people really do when building a barn. You don’t toss out a good board due to a knothole  or split in the grain,  you just use it and move on, so we have saved and used the knots and splits as part of our over all design plan. Not every one is comfortable with the imperfections of the barn wood like we are, but this application is simple and less time-consuming then other wood treatments.

The remaining walls should be pretty easy to cover up until Tom needs to cover the fuse box. He will need to make a door with country hinges and an old fashion lock for decoration. Then 4 inch molding will go across the base of the wall and 2 inch molding around the top. Again this will be nothing fancy just simple cut boards and nails to finish off the look.

So if you want to read more about how we got the boards for this project or have interest in reclaiming barn wood check out some of my other posts about working with The Barnwood Builder TV show and Our House Remodel #2

In the future I hope I am able to post more photos of the family room and our new little friends I just wonder if I can get more photos of them before they leave the nest forever? We will see!